If you have a recessed under-cabinet surface like I have, with a 1 1/2 inch skirt, nothing provided with the unit will enable you to mount it. The spacers are insufficient and the screws are too short, and nowhere in the documentation is there a cure. But before you go crazy trying to find screws and spacers long enough to jerry-rig a mount, as so many have done, call Black and Decker customer service and get parts. They know about the problem and have long screws and mounts to correctly mount the unit.I haven't yet been able to try mine, so I don't know how good it is. But whoever is responsible for the absence 0f longer screws or advice on how to get them ought to be skinned.
Initially I was becoming desperate as there were very few choices and none locally on this island out in the middle of the Pacific ocean.
First I needed a replacement for my 15 year old underconter machine.
Second Nothing that sets on the counter is welcome in my kitchen unless there is no other way.
Third I read all of the reviews of all existing in the market place machines.
Nobody really liked any of them for a variety of reasons not related to opening cans.
Fourth the reviews of this machine by all concerned were better than for other machines.
The bag ripper and sharpener are wasted on me I am far too tall to use them and the sharpening steel and fillet knife are too handy anyway.
YES SHARPENING STEELS WORK REALLY WELL AS THEY LEAVE THE PERFECT EDGE FOR PAPER AND MEAT WHEN USED ON CARBON STEEL BLADES. You already know that you only use one knife in your kitchen for everything short of chopping. If you lost it you would be devestated.
THE GOOD NEWS
IT WORKS LIKE IT IS SUPPOSED TO
IT COMES WITH ALL THE STUFF YOU NEED TO MOUNT IT
THE BAD NEWS
THE DESIGNER WAS PROBABLY 80 P0UNDS AND 4 FOOT 8 INCHES TALL
YOU REALLY HAVE TO DUCK DOWN TO SEE HOW TO SKEWER THE CAN TO GET IT GOING
BUT IT WORKS WHICH IS BETTER THAN THE OTHERS. My old presto worked a lot better but it was made in the U.S.A. and that is a hard act to follow. For a Chinese can opener this one is pretty good.
Today that is as good as it is going to get for stuff you can buy over the counter and if you want a better one you will have to get the commercial hand crank $300 wall mount one that will pull the top off anything all day long for a hundred years.
I AM PLEASED WITH IT AND WILL REMAIN SO UNTIL IT FAILS AND BY THEN ALL CANS WILL HAVE RIP TOPS LIKE CAMPBELLS SOUP.
Buy Black & Decker CO100 Spacemaker Traditional Multi-Purpose Can Opener, White Now
I had a Rival under the cabinet can opener that was terrific. It had a button to push to swing it up and out of the way when not in use. The Black and Decker is larger but fits well under the cabinet. So far it has proved to be very effecient. I haven't tried the bag opener yet but all in all it is a good product.seems to work fine as a can opener but very loud/grindy sounding motor. I really do not like the fold down front cover and would not have bought this item had the listing made it clear to me that there was a fold down front cover. the last Spacesaver can opener from B & D that we had the entire opener rotated out of view for a closed, smooth surface when not in use.also, I've had numerous Spacesaver items coffee makers, can openers, etc., over the years and not a single one of them used the same hole pattern for mounting. this one was no different. had to drill 4 new holes in the counter even though I was replacing a B & D Spacesaver can opener with a B & D Spacesaver can opener. why the heck can't B & D get smart about this simple stuff and use a common template for their mounting for a given product line??? seems SO common sense.
sorry, not at all impressed with this product and I'm being generous giving it 3 stars.
Want Black & Decker CO100 Spacemaker Traditional Multi-Purpose Can Opener, White Discount?
It was easy to install under a cabinet. It works well and is easy to keep clean. I highly reccomend it.
0 comments:
Post a Comment